ZKTeco OMNIAC20[IDL] Standalone Biometric Reader

ZKTeco OMNIAC20[IDL] Standalone Biometric Reader — RFID Access Control Reader

The ZKTeco OMNIAC20[IDL] Standalone Biometric Reader is the kind of Standalone Reader system integrators specify by name. Notably, its read range, beep/LED feedback and tamper protection are all calibrated for Indian commercial buildings — not generic global retail boxes that fall over at 45 °C.

Why integrators specify the OMNIAC20[IDL] Standalone Biometric Reader

🔌 Wiegand & OSDP — drops into any compatible access-control panel without firmware gymnastics. As a result, retrofits stay simple.

🛠️ Easy install — standard back-box mounting and dual-voltage power keep installation time short for integrators.

🌧️ Built for any entrance — IP-rated housing handles outdoor canopies, dusty industrial zones and humid lobbies with equal indifference.

🔔 LED & buzzer feedback — clear visual and audio cues guide users at busy reception desks and shift-change gates.

⚡ Fast read time — typical read completes in well under 200 ms, so doors and turnstiles never become the bottleneck.

🔐 Encrypted RFID stack — cloning and skimming attacks are blocked at the hardware level. Consequently, your credential ecosystem stays clean even at scale.

Where this fits best

Multi-door enterprise · Factory shop floors · Single-door offices · Hotel back-office doors · Parking entry/exit · Hostel and dormitory entry · Hospital restricted wards

Specifications at a glance

• Model: ZKTeco OMNIAC20[IDL] Standalone Biometric Reader
• Category: Standalone Reader
• Credential support: EM 125 kHz / Mifare 13.56 MHz (variant-dependent)
• Output: Wiegand 26/34, OSDP
• Power: 12 V DC standard
• Feedback: LED & buzzer
• Ingress protection: IP65 (variant-dependent)
• Operating temperature: -10 °C to +60 °C
• Warranty: 12-month manufacturer warranty

Frequently asked questions

Q. What warranty does it come with?
12-month manufacturer warranty from the date of invoice, supported by ZKTeco India authorised distribution.

Q. What credentials are supported?
The OMNIAC20[IDL] Standalone Biometric Reader reads standard EM 125 kHz, Mifare 13.56 MHz, and most common HID-formatted cards. Furthermore, encrypted Mifare and DESFire credentials are supported on the relevant variants.

Q. What's included in the box?
The reader unit, mounting back-box, basic cable harness, quick-start guide and screws. Power and panel-side wiring are configured during installation.

Q. What is the read range of the OMNIAC20[IDL] Standalone Biometric Reader?
Read range depends on the credential type — typically 3–10 cm for Mifare/EM cards and up to several centimeters for high-frequency Mifare. For long-range applications, consider our dedicated UHF reader range.