ZKTeco OMNIAC30[ICH] 5-inch Standalone Biometric Reader

ZKTeco OMNIAC30[ICH] 5-inch Standalone Biometric Reader — RFID Access Control Reader

The ZKTeco OMNIAC30[ICH] 5-inch Standalone Biometric Reader is the kind of Standalone Reader system integrators specify by name. Notably, its read range, beep/LED feedback and tamper protection are all calibrated for Indian commercial buildings — not generic global retail boxes that fall over at 45 °C.

Why integrators specify the OMNIAC30[ICH] 5-inch Standalone Biometric Reader

🔔 LED & buzzer feedback — clear visual and audio cues guide users at busy reception desks and shift-change gates.

🌧️ Built for any entrance — IP-rated housing handles outdoor canopies, dusty industrial zones and humid lobbies with equal indifference.

🛡️ Tamper alarm — back-tamper switch alerts your panel if the unit is forced off the wall.

⚡ Fast read time — typical read completes in well under 200 ms, so doors and turnstiles never become the bottleneck.

🛠️ Easy install — standard back-box mounting and dual-voltage power keep installation time short for integrators.

🔌 Wiegand & OSDP — drops into any compatible access-control panel without firmware gymnastics. As a result, retrofits stay simple.

Where this fits best

Retail stockrooms · Factory shop floors · Turnstile lanes · Server rooms · Single-door offices · Hotel back-office doors · Parking entry/exit

Specifications at a glance

• Model: ZKTeco OMNIAC30[ICH] 5-inch Standalone Biometric Reader
• Category: Standalone Reader
• Credential support: EM 125 kHz / Mifare 13.56 MHz (variant-dependent)
• Output: Wiegand 26/34, OSDP
• Power: 12 V DC standard
• Feedback: LED & buzzer
• Ingress protection: IP65 (variant-dependent)
• Operating temperature: -10 °C to +60 °C
• Warranty: 12-month manufacturer warranty

Frequently asked questions

Q. Is the OMNIAC30[ICH] 5-inch Standalone Biometric Reader suitable for outdoor installation?
The OMNIAC30[ICH] 5-inch Standalone Biometric Reader is IP-rated for use under entrance canopies and protected outdoor areas. For fully exposed installations, however, we recommend a small weatherproof housing for the cable termination.

Q. What warranty does it come with?
12-month manufacturer warranty from the date of invoice, supported by ZKTeco India authorised distribution.

Q. What credentials are supported?
The OMNIAC30[ICH] 5-inch Standalone Biometric Reader reads standard EM 125 kHz, Mifare 13.56 MHz, and most common HID-formatted cards. Furthermore, encrypted Mifare and DESFire credentials are supported on the relevant variants.

Q. What is the read range of the OMNIAC30[ICH] 5-inch Standalone Biometric Reader?
Read range depends on the credential type — typically 3–10 cm for Mifare/EM cards and up to several centimeters for high-frequency Mifare. For long-range applications, consider our dedicated UHF reader range.