Why a dedicated floor stand?

Wall-mounted biometric devices look temporary, suffer from cable clutter, and are awkward to relocate. Direct drilling into flap barriers, turnstiles, or glass partitions damages expensive equipment and voids warranties. A purpose-built floor mounting stand gives your face / fingerprint attendance machine a permanent, vibration-free home — at the right height, with hidden cabling and a finish that matches professional office, factory, school, and warehouse environments.

• Ergonomic capture height

  Stand height positions face / fingerprint sensors at ~1200–1400 mm — the optimal range for fast, first-attempt recognition without users bending or stretching.

• Vibration-free recognition

  The wide steel base eliminates wobble that causes face-detection failures and fingerprint mis-reads on lighter desktop or wall fittings.

• Universal compatibility

  Top plate is pre-drilled with multiple hole patterns so it fits the most common Indian and global biometric terminals out of the box.

• Tamper-resistant build

  Heavy-gauge powder-coated steel resists impact, scratches, and rust — built for high-traffic factory gates, school entrances, and reception areas.

• Hidden cable routing

  Internal channel runs power and LAN cables down through the column and out at the base — no exposed wires, no trip hazards.

• Relocatable

  Move the stand to a new entrance or shift floor without re-drilling walls. Ideal for leased offices, expanding factories, and multi-shift sites.

Confirmed compatibility

Designed for face recognition, fingerprint, and RFID-card based attendance & access-control machines from leading brands:

• eSSL
• ZKTeco
• Matrix
• Biomax
• Spectra
• Fortuna
• Realtime
• Hikvision
• CP Plus
• Mantra
• Most universal face / fingerprint / RFID terminals

Not sure if it fits your specific model? Send us the device model number on WhatsApp at +91 9315441078 — we'll confirm before you order.

Technical specifications

What's in the box

• 1 × Floor mounting stand (assembled column + base)
• 1 × Universal top mounting plate
• 1 set Floor anchor bolts & screws
• 1 set Device-mounting screws
• 1 × Allen key
• 1 × Quick-start installation guide

Note: Biometric attendance machine is not included. This listing is for the floor mounting stand only.

Installation in 4 simple steps

1. Position the stand at your chosen entrance — typically 30–40 cm clear of walls or barriers for full sensor field-of-view.
2. Mark and drill the four base holes using the supplied template, then secure with the included anchor bolts.
3. Run power and LAN cables through the internal column channel and out at the base of the stand.
4. Mount your attendance device on the top plate using the matching screw pattern — done in under 10 minutes.

Frequently asked questions